TP-Link TL-SG1006PP V1, Switch, unmanaged, 1 x 10/100/1000 (PoE++) + 3 x 10/100/1000 (PoE+) + 2 x 10/100/1000, desktop, PoE++ (64 W)

Description

TL-SG1006PP is a switch with 6 Gigabit ports that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant powered devices (PDs) at port 1 and IEEE 802.3af/at compliant powered devices (PDs) at port 2-4. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP cameras or IP phones, etc.

• 6x 10/100/1000 Mbps RJ-45 ports
• With one PoE++ port and three PoE+ ports, transfers data and power on one single cable
• Works with IEEE 802.3af/at/bt compliant PDs
• 802.1p/DSCP QoS enable smooth latency-sensitive traffic
• Supports PoE power up to 30 W for each PoE+ port and 60 W for PoE++ port
• Supports PoE power up to 64 W for all PoE ports
• Up to 250 m data and power transmitting range under Extend Mode
• PoE auto recovery ensures stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
• Plug-and-Play, no configuration and installation required

• Power over Ethernet
  4 RJ-45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those IEEE 802.3af/at/bt compliant powered devices (PDs) at port 1 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 2-4.
• Overload arrangement
  TL-SG1006PP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is more than or equals 64 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
• Intelligent power management
  Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, port 2, 3, and 4 is using 18 W respectively (maximum power per port is 30 W); the system power is 54 W in total. If there is an additional PD inserted to port 1 with 25 W, and then the system will cut off the power of port 4 because of the overloaded power, this means port 2 and 3 will use 18 W respectively and port 1 will use 25 W, no power will be supplied to port 4.
• Excellent performance
  Up to 250 m PoE power supply and data transmission under Extend Mode for port 1-2. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-4. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.
• Easy to use
  TL-SG1006PP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 6-port Gigabit desktop switch with 3-port PoE+ and 1-port PoE++ TL-SG1006PP is a great selection for expanding your network.

Main Specifications

Extended Specifications

General

Expansion / Connectivity

Power

Miscellaneous

Dimensions & Weight

Environmental Parameters