TP-Link TL-SL5428E - Switch - Managed - 24 x 10/100 + 4 x 10/100/1000 + 2 x shared SFP - desktop


  • Product Status: Out Of Stock
  • PP ID Code:AA42614
  • Manufacturer Part No:
    TL-SL5428E
  • Warranty:2 Years

$364.56

inc GST & Free Delivery

ADD TO CART

Description

Designed for workgroups and departments, TL-SL5428E from TP-link provides full set of Layer 2 management features. It delivers maximum throughput where you need it - to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. Moreover, TL-SL5428E switch also comes equipped with 2 combo SFP slots, giving you greater network flexibility.
This TP-link L2 managed switch has robust security and management features. For workgroup and departments requiring cost-sensitive Layer 2 switch, and additional Gigabit capability, TP-link L2 fully managed switch TL-SL5428E can provide you the ideal access-edge solution.

  • Single-IP-management supports virtual stack of 32 units
  • L2/L3/L4 QoS and IGMP snooping optimize voice and video application
  • Non-blocking switching
  • Virtual stackable
  • Comprehensive security strategy
  • Enterprise level manageability and resiliency
  • Optimized voice and video applications
  • Resiliency and availability

  • Non-blocking switching
    The TP-link fully managed L2 switch TL-SL5428E provides non-blocking switching solution for a 10/100 Fast Ethernet connection. As to the switching capacity, TL-SL5428E has a non-blocking aggregated bandwidth of 12.8Gbps. It provides 24 10/100Mbps ports and 4 Gigabit 10/100/1000BASE-T ports. In these Gigabit copper ports, two of these ports are combo Gigabit ports, which will be disabled if the corresponding 1000BASE-X SFP slots are used. It can give you greater network flexibility.
  • Virtual stackable
    IP clustering allows up to 32 TL-SL5428E switches to be managed by a single IP, regardless of geographical locations. With all units identified by a single IP address, the stack could be configured, monitored, maintained as a single object. Traffic running across units in this virtual stack utilizes full-duplex interfaces and network wires, eliminating costly and cumbersome cables, minimizing the impact of any single point of failure.
  • Comprehensive security strategy
    The TL-SL5428E switch supports 802.1x authentication, which is used to require some authentication information before access to the network is allowed. And more, it enables the non-802.1x clients to access the specific network resource. Regarding to the Dos defending, TL-SL5428E provides you some typical Dos attacks to select. You can protect these attacks more easily ever than before. TL-SL5428E will provide you robust security to the network.
  • Enterprise level manageability and resiliency
    TL-SL5428E supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface (CLI), either administration traffic can be protected through SSL or SSH encryptions. This sharing of vital management information saves time and money. With link aggregation, spanning tree protocol and virtual stack, a highly intelligent and scalable topology could be established, fulfilling the enterprise customers' requirement of building a unified, resilient network.
  • Optimized voice and video applications
    To integrate voice, data and video service on one network, TL-SL5428E applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means, so voice and video are always clear, smooth and jitter free. For other multimedia-on-demand application provides advanced features for easy stream management.
  • Resiliency and availability
    Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data. IEEE 802.1s multiple spanning tree, provides high link availability in multiple VLAN environments. It supports IEEE 802.1d/w Spanning Tree (STP/RSTP).

Main Specifications

Product Description TP-Link TL-SL5428E - switch - 24 ports - Managed
Features Auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, store and forward, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control
Dimensions (WxDxH) 44 cm x 26 cm x 4.4 cm
Power AC 120/230 V (50 - 60 Hz)
Device Type Switch - 24 ports - Managed
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, SSH-2
Routing Protocol IGMPv2, IGMP, IGMPv3
MAC Address Table Size 8K entries
Ports 24 x 10/100 + 4 x 10/100/1000 + 2 x shared SFP
Subtype Fast Ethernet

  • Documents
  • Extended Specifications

  • Dimensions & Weight
    Width 44 cm
    Depth 26 cm
    Height 4.4 cm
    Environmental Parameters
    Min Operating Temperature 0 °C
    Max Operating Temperature 40 °C
    Humidity Range Operating 10 - 90% (non-condensing)
    Expansion / Connectivity
    Interfaces 24 x 100Base-TX RJ-45
    4 x 1000Base-T RJ-45
    1 x console RJ-45 management
    2 x SFP (mini-GBIC)
    General
    Device Type Switch - 24 ports - Managed
    Enclosure Type Desktop
    Subtype Fast Ethernet
    Ports 24 x 10/100 + 4 x 10/100/1000 + 2 x shared SFP
    MAC Address Table Size 8K entries
    Routing Protocol IGMPv2, IGMP, IGMPv3
    Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, SSH-2
    Authentication Method RADIUS
    Features Auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, store and forward, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control
    Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
    Status Indicators Power, link/activity
    Miscellaneous
    Compliant Standards FCC
    Power
    Power Device Internal power supply
    Voltage Required AC 120/230 V (50 - 60 Hz)