StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5"/3.5" HDDs/SSDs with UASP(UNIDOCKU33) - Storage controller - 2.5", 3.5" - ATA / SATA 6Gb/s - 6 Gbit/s - USB 3.0 - black - for P/N: SVA12M5NA


  • Product Status: In Stock
  • PP ID Code:AA98496
  • Manufacturer Part No:
    UNIDOCKU33
  • Warranty:2 Years

$143.78

inc GST & Free Delivery

ADD TO CART

Description

Connect both an IDE and a SATA 2.5/3.5in hard drive or solid state drive to your computer system using an available USB 3.0 port, with support for UASP for optimal performance. The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.
Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.
A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

  • Maximum versatility with support for SATA and IDE as well as 2.5in and 3.5in HDDs & SSDs
  • Optimal performance with support for SATA III & UASP
  • Hassle-free operation with upright slot-loading SATA and IDE drive bays
  • Compatible with USB 3.0/2.0/1.1
  • Compatible with SATA revision I/II/III drives
  • Compatible with PATA (IDE) 66/100/133 MBps hard drives
  • Supports 2.5" or 3.5" form factor hard drives (HDD) or solid state drives (SSD)
  • Compact, desktop-style form factor
  • Plug-and-Play and hot-swap compatible
  • Patented drive ejection mechanism for SATA drives
  • Combined power switch and status LED for each drive

Main Specifications

Product Description StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5"/3.5" HDDs/SSDs with UASP (UNIDOCKU33) - storage controller - ATA / SATA 6Gb/s - USB 3.0
Manufacturer Warranty 2-year warranty
Dimensions (WxDxH) 14 cm x 13 cm x 7 cm
Weight 610 g
Power AC 120/230 V
System Requirements Linux, Apple MacOS X 10.6, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits), Google Chrome OS, Apple MacOS X Lion 10.7, Windows 8 (32/64 bits), Apple MacOS X 10.8, Windows 8.1 (32/64 bits), Apple MacOS X 10.9
Device Type Storage controller - external
Data Transfer Rate 6 Gbit/s
Max Storage Devices Qty 2
Product Material Plastic
Supported Devices Hard drive, solid state drive
Expansion Bays 1 x hot-swap - 2.5" / 3.5" shared
1 x top accessible - 2.5" / 3.5" shared
Colour Black
Interface ATA / SATA 6Gb/s
Hard Drive Form Factor Compatibility 2.5", 3.5"
Bus Type USB 3.0
Designed For P/N: SVA12M5NA

  • Extended Specifications

  • Compatibility Information
    Designed For P/N: SVA12M5NA
    Dimensions & Weight
    Width 14 cm
    Depth 13 cm
    Height 7 cm
    Weight 610 g
    Environmental Parameters
    Min Operating Temperature 5 °C
    Max Operating Temperature 80 °C
    Humidity Range Operating 8 - 90%
    Expansion / Connectivity
    Bays 1 x hot-swap - 2.5" / 3.5" shared
    1 x top accessible - 2.5" / 3.5" shared
    Interfaces 1 x SATA 6Gb/s - SATA combo (internal (bay1))
    1 x ATA-133 - 40 PIN IDC (rear)
    Connections 1 x USB 3.0 - 9 pin USB Type B
    General
    Device Type Storage controller - external
    Hard Drive Form Factor Compatibility 2.5", 3.5"
    Host Bus USB 3.0
    Product Material Plastic
    Colour Black
    Miscellaneous
    Cables Included 1 x USB 3.0 cable - external
    2 x IDE cable - external
    Features LED indicator, tested with up to 1TB 5400 RPM 2.5” hard drives, tested with up to 6TB 7200 RPM hard drives, UASP transfer protocol
    MTBF 30,000 hours
    Compliant Standards Plug and Play, FCC, RoHS
    Power
    Type Power adapter
    Voltage Required AC 120/230 V
    Software / System Requirements
    OS Required Linux, Apple MacOS X 10.6, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits), Google Chrome OS, Apple MacOS X Lion 10.7, Windows 8 (32/64 bits), Apple MacOS X 10.8, Windows 8.1 (32/64 bits), Apple MacOS X 10.9
    Storage Controller
    Interface ATA / SATA 6Gb/s
    Data Transfer Rate 6 Gbit/s
    Supported Devices Hard drive, solid state drive
    Max Storage Devices Qty 2
    Processor JMicron JMS561U / JMD330

  • Warranty
  • Manufacturer WarrantyService & Support Limited warranty - 2 years