Description
The rackmount TL-R1200C-RP JBOD storage enclosure allows you to back up and expand your QNAP NAS, computers (supports Windows and Mac), and servers. The TL-R1200C-RP features twelve 3.5-inch SATA 6Gb/s drive bays with USB 3.2 Gen 2 (10 Gbps) Type-C connectivity to provide a fast and smooth expansion solution.
The TL-R1200C-RP provides software-controlled configurations for greater management flexibility. Users can configure RAID and monitor disk health using the QTS / QTS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on their computer.
- USB 3.2 Gen 2 Type-C connectivity provides up to 10 Gb/s data transfer speeds
- The port can support USB Type-A to Type-C connection or Thunderbolt 3 Type-C connection using different cables
- Provides high capacity and affordability, making it an excellent backup solution for QNAP NAS
- 250W redundant power supply to ensure maximum system uptime
Main Specifications
Product Description | QNAP TL-R1200C-RP – hard drive array |
Device Type | Hard drive array |
Enclosure Type | Rack-mountable – 2U |
Interface | USB 3.2 Gen 2 |
Installed Devices / Modules Qty | 0 (installed) / 12 (max) |
Supported Drives | SATA-600 |
Storage Controller | SATA (SATA 6Gb/s) – RAID JBOD |
Hard Drive | No HDD |
OS Required | Linux, Microsoft Windows, QNAP QTS, QNAP QTS hero |
Power | AC 120/230 V |
Power Redundancy | Yes |
Dimensions (WxDxH) | 48.2 cm x 56.25 cm x 8.86 cm |
Weight | 11.03 kg |
Extended Specifications
General
Device Type | Hard drive array |
---|
Enclosure Type | Rack-mountable – 2U |
---|
Chassis
Installed Devices / Modules Qty | 0 |
---|
Supported Devices / Modules Qty | 12 |
---|
Supported Drives | SATA-600 |
---|
Storage
HDD Array External Interface | USB 3.2 Gen 2 |
---|
Storage Controller
Type | SATA |
---|
Interface Type | SATA 6Gb/s |
---|
RAID Level | JBOD |
---|
Hard Drive
Expansion / Connectivity
Expansion Bays | 12 (total) / 12 (free) x hot-swap – 2.5″ / 3.5″ shared |
---|
Interfaces | 1 x USB 3.2 Gen 2 – 24 pin USB-C |
---|
System Requirements
OS Required | Linux, Microsoft Windows, QNAP QTS, QNAP QTS hero |
---|
Miscellaneous
Features | Built-in 2 cooling fans |
---|
Cables Included | 1 x USB-C to USB-A cable |
---|
Included Accessories | 2 power cords, cable clip, 36 flat head screws (for 2.5″ HDD), 48 x flat head screws (for 3.5″ HDD) |
---|
Power
Power Device | Internal power supply |
---|
Power Redundancy | Yes |
---|
Voltage Required | AC 120/230 V |
---|
Power Consumption Operational | 82.26 Watt |
---|
Power Provided | 250 Watt |
---|
Dimensions & Weight
Width | 48.2 cm |
---|
Depth | 56.25 cm |
---|
Height | 8.86 cm |
---|
Weight | 11.03 kg |
---|
Dimensions & Weight (Shipping)
Environmental Parameters
Min Operating Temperature | 0 °C |
---|
Max Operating Temperature | 40 °C |
---|
Humidity Range Operating | 5 – 95% (non-condensing) |
---|
Sound Emission | 33.4 dBA |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.